4 - 16 MC909X Integrator Guide
Figure 4-21
Password Dialog Box
1. Enter a password in the Password field.
2. Select the Advanced ID check box, if advanced identification is required.
3. Tap Next. The Encryption dialog box displays. See Encryption on page 4-17.
Advanced Identity
Use the Advanced ID dialog box to enter the 802.1X identity to supply to the authenticator. This value can be 63
characters long and is case sensitive. In TTLS and PEAP, it is recommended entering the identity anonymous
(rather than a true identity) plus any desired realm (e.g., anonymous@myrealm). A user ID is required before
proceeding.
Figure 4-22
Advanced Identity Dialog Box
Tap Next. The
Encryption dialog box displays.
Encryption
Use the Encryption dialog box to select an encryption type. The drop-down list includes encryption types available
for the selected authentication type. See Table 4-12 for these encryption types.
Figure 4-23
Encryption Dialog Box
NOTE When authenticating with a Microsoft IAS server, do not use advanced identity.
To Next Page
Loading...
Need help?
General