Motorola MC909X - MC9097 Service Verification; Configuring iDEN Data Connection

6 - 2 MC909X Integrator Guide
Figure 6-1 Phone Settings Window - Network Tab
3. Ensure the service provider’s network appears in the Current network: field.
4. If the network does not appear, tap Find Network. If the network still does not appear, verify that the SIM card
was installed correctly. If it was, and no network appears, contact the service provider.
Configuring an iDEN Data Connection
The MC9097 is pre-configured for data communication.
To set up a new data connection:
1. Tap Start > Settings > Connections tab > Connections icon > Tasks tab.
Figure 6-2 Connections Window
2. Under My ISP select Add a new modem connection. The Make New Connection window appears.
NOTE To verify active Nextel phone and data services, tap to display the Connectivity dialog.