5 - 2 MC909X Integrator Guide
5. Ensure network coverage (Ensuring Network Coverage on page 5-2).
6. Configure an GPRS data connection (Configuring an GPRS Data Connection on page 5-3).
7. Configure settings (Phone Settings on page 5-7).
8. Use the phone.
MC9094 Service Verification
MC9094 phone and data services require a live SIM card, obtained from a service provider, installed in the
MC9094 phone/mobile computer. The SIM card has embedded circuitry on one side of its surface which, when
inserted into a MC9094 phone, provides phone service on an EDGE/GPRS network. The SIM card provides a
phone number, determines the features or services available to the subscriber and identifies the subscriber to the
network.
In addition to SIM card installation, various settings may be required for the mobile computer to operate as a phone
with data connection features.
When connected to a GRPS network, the icons appears in the Status Bar and when connected to an EDGE
network the icon appears in the status bar.
Ensuring Network Coverage
1. Ensure an activated SIM card, from the phone service provider, is installed in the mobile computer.
2. Verify active phone and data services by tapping to display the Phone dialog. The network service provider
name appears in the dialog box.
Figure 5-1
Connectivity Dialog
3. Verify SIM card functionality.
a. Tap Start > Settings > Phone icon > Network tab.
NOTE The SIM card must be EDGE/GPRS enabled to connect to a EDGE/GPRS network.
To Next Page
Loading...
Need help?
General