Using iDockIt B - 3
How To Start iDockIt
To start iDockIt the first time, tap Start > Programs > iDockIt. Thereafter, tap Start > iDockIt.
How To Enable iDockIt To Manage Connections
On the iDockIt General tab, check Enable iDockIt to enable iDockIt to control cradle events. When you cradle the
mobile computer, iDockIt identifies the cradle and perform the activities you have configured for it.
To connect automatically to a host computer or network:
1. Tap the iDockIt General tab.
2. Check Enable iDockIt.
3. Check or uncheck Display status when cradled.
4. Check or uncheck Display settings when cradled; the Autoconnect setting is also optional.
5. Tap the iDockIt tab that corresponds to your cradle type and check Establish network connection and optionally
Launch application.
To connect manually to your host computer or network:
While iDockIt is designed to connect your mobile computer to a specified host computer or network automatically,
you can also choose your connection manually whenever you place the mobile computer in the cradle.
1. Tap the iDockIt General tab.
2. Check Enable iDockIt.
3. Check or uncheck Display status when cradled.
4. Check Display settings when cradled. When you place the mobile computer in the cradle, the Settings tab
displays automatically.
5. Uncheck the Autoconnect option.
6. Tap the iDockIt tab that corresponds to your cradle type.
7. Check Establish network connection and optionally Launch application.
When you place the mobile computer in a cradle, iDockIt displays the
Settings tab corresponding to that cradle.
Choose the type of connection and tap . Another way to connect manually is to establish new connection
settings before you place the mobile computer in the cradle.
To launch an application when you connect:
1. Tap the iDockIt General tab.
2. Check Enable iDockIt.
3. Tap the tab that corresponds to the type of cradle you are using.
4. Select a connection option as described above.
5. Tap Launch application.
6. Tap Select and select the application you want to launch when you place the mobile computer in the cradle.
Enter any necessary program arguments.
To Next Page
Loading...
Need help?
General