1 - 10 MC909X Integrator Guide
Figure 1-5
Removing the Main Battery
Figure 1-6
Removing the Main Battery - MC909X-S
Starting the Mobile Computer
Press the red Power button to turn on the mobile computer. If the mobile computer does not power on, perform a
cold boot. See Performing a Cold Boot on page 2-41.
When the mobile computer is powered on for the first time, it initializes its system. The splash screen (Figure 1-7)
appears for a short period of time.
Primary Battery Releases
Secondary Battery Release
Primary Battery Release
Secondary Battery
Release
NOTE When a battery is fully inserted in a mobile computer for the first time, upon the mobile computer’s first
power up, the device boots and powers on automatically.