Motorola MC909X - Page 222

9 - 2 MC909X Integrator Guide
.
Figure 9-1 RD Bar Code Printout Sample
To access the
Rapid Deployment window tap > Programs > Rapid Deployment Client.
Figure 9-2 Rapid Deployment Window (Version 1.9.0)
Table 9-1 Rapid Deployment Application Descriptions
Text Box/Button Description
Please scan all of the bar
codes...
Displays the status of a scanned bar code.
Waiting - indicates the mobile computer is ready to scan a bar code.
OK - indicates the mobile computer successfully scanned a bar code. (The Indicator
LED bar on the mobile computer turns green and a beep sounds).
If there are no bar codes left to scan, the
Rapid Deployment Configuring window
displays.
Bar codes left to scan... Displays a list of any remaining bar codes to scan (1-D bar codes only). When all
required bar codes are scanned successfully, the
Rapid Deployment Configuring
window displays.
About Displays the
Rapid Deployment Client Info window.
Reset Removes any previously scanned data.
Exit Closes the application. A confirmation window displays. Tap
Yes to exit or No to return
to the
Rapid Deployment window.
Note: If the application is exited prior to scanning all required bar codes, any scanned
data collected up to that point is lost.