Staging and Provisioning 9 - 31
•
The Status List displays status messages that indicate the progress of the synchronization process.
•
Press ENTER to return to the Main Menu. This button remains inactive until the synchronization process is
complete.
•
Select Retry and press ENTER to restart the synchronization process. This button is activated only if there is
an error during the synchronization process.
Automatic Synchronization
The AirBEAM Smart Client can be configured to launch automatically using the Misc(1) Preference tab (see
Misc(1) Tab on page 9-25). When setting automatic synchronization, use the Auto-load drop-down list to specify
how the AirBEAM Smart Client should be invoked automatically when the client device is rebooted. See Misc(1)
Tab on page 9-25 for instructions on enabling Auto Sync.
To Next Page
Loading...
Need help?
General
