• If the printer perform the nozzle check printing immediately after initial charging is complete, the
following results may occur.
• Printed lines become blurred.
• The data is partially not printed.
In such cases, follow "
5.5 Cleaning menu" and refill a small amount of ink. Then, check the
printing result.
If there is no improvement in the print result even after refill a small amount of ink, leave the printer
unused for an hour or more. Then, refill a small amount of ink again and check the print result.
If there is still no improvement, contact your local MUTOH dealer.
To Next Page
Loading...
Need help?
General