MUTOH vj-1617h - Page 95

VJ-1617H OPERATION MANUAL Before using
3-59
7. Rewind the roll media a little by rolling the flange on the roll media holder while holding the edge
of the media, and eliminate any slack or slant.
NOTE
• If you rewind the roll media too much, the roll media may come off from Media feed slot and may
fall on the rear side of the printer.
• If the right edge of the roll media is placed further right of the loading mark, media detection may
fail, possibly affecting print quality.
No. Name
1 Roll media
2Media feed slot
No. Name
1 Roll media
2 Media loading mark
1
2
1
2
1