Manage Rogue Access Points, Guest Network Access, and Users
232
ProSAFE Wireless Controller
7. Configure the settings as described in the following table.
Setting Description
Portal Settings section
Portal Type Select one of the following radio buttons:
• Guest. A guest portal with a field for entering an email address.
Guests do not need to provide a password and can get unlimited access to
the network. You do not need to configure guest accounts.
• Captive. A captive portal with a field for entering a login user name and a
field for entering a password.
If you select this option, the Radius Server radio buttons and menu display.
For information about how to configure captive portal users and accounts,
see Manage Users, Accounts, and Passwords on page 236.
Radius Server
Note: This setting is for a
captive portal only.
Select one of the following radio buttons:
• Local. Use the local authentication server.
• External. Select an external authentication server from the menu.
Note: For information about setting up and enabling internal and external
authentication servers, see Manage Authentication Servers and Authentication
Server Groups on page 140.
Redirect URL To redirect traffic to a URL after successful captive authentication, select the
check box and enter the URL.
By default, traffic is not redirected.
Max Clients Per User Specify the number of clients that a single captive portal user can open with the
same the login information.
The default setting is 1. The maximum number of clients that you can select
from the menu is 5.
Reauthentication
Timeout
Specify the period after which a user who was idle must be reauthenticated.
The minimum period is 30 minutes. The maximum period that you can select
through the menus is 24 hours.
Select Placement Click the Center, Bottom, or Top button to specify the location of the login
prompt on the login page.
To Next Page
Loading...
Need help?
General
