NETGEAR ProSAFE WC7500 User Manual

Monitor the WiFi Network and Its Components
329
ProSAFE Wireless Controller
The following table describes the fields of the Access Point page.
Item Description
Select The radio button that lets you select the access point.
Status The status of the access point (healthy or down).
Name The name of the access point (see Change Access Point Information on the
Managed AP List on page 170).
Model The model of the access point.
MAC The MAC address of the access point.
IP The IP address of the access point.
Site Shows whether you designated the access point as a local or remote one:
• Local. The access point is designated as a local.
• Remote. The access point is designated as remote.
For more information about designating an access point as local or remote, see
Discover Access Points With the Discovery Wizard on page 159.
Group The profile group to which the access point is assigned (see Assign Access
Points to Buildings, Floors, and Advanced Profile Groups on page 174).
Building The building to which you assigned the access point (see Change Access Point
Information on the Managed AP List on page 170 or Assign Access Points to
Buildings, Floors, and Advanced Profile Groups on page 174).
Floor The floor to which you assigned the access point (see Change Access Point
Information on the Managed AP List on page 170 or Assign Access Points to
Buildings, Floors, and Advanced Profile Groups on page 174).
Location The location of the access point (see Change Access Point Information on the
Managed AP List on page 170).

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English