Monitor the WiFi Network and Its Components
330
ProSAFE Wireless Controller
5. To sort the table, click the double triangle icon or single triangle icon at the top right of a
column.
6. To search the table, in the Search field, enter the information that you are looking for, such
as an IP address or MAC address.
7. If the table contains many entries, navigate through the table by using the following buttons
and menu that display at the bottom of the table:
• To move to the next page, click the Next button.
• To move to the previous page, click the Previous button.
• To change the number of entries onscreen, from the Entry Per Page menu, select
20, or 40, or 60, and so on, or All.
8. To display the latest information onscreen, click the REFRESH button.
9. To export the table, do the following:
a. Click the EXPORT button.
b. To save the file, follow the directions of your browser.
10. To display details about an access point, do the following:
a. Select the radio button that corresponds to the access point for which you want to see
the details.
b. Click the Details button.
The AP Details pop-up window opens. Because this window is tall and you must scroll
through it, the window is shown in the following two figures.
2.4/5 GHz Channel The active 2.4 GHz or 5 GHz channel on the access point. This information can
change after initial configuration of the access point because of automatic
channel allocation.
The color coding specifies the channel utilization on each radio and means the
following:
• Green. 0–40 percent utilization.
• Light green. 41–60 percent utilization.
• Orange. 61–80 percent utilization.
• Red. 81–100 percent utilization.
• NA. The radio does not support the band.
Uptime The period since the access point was last restarted.
Item Description
To Next Page
Loading...
Need help?
General
