Oce 9600 - Page 108

108 Océ 9600 Copier/Printer User Manual
Printer status window
The printer status window is used to display the printer
status messages, such as: Power off, Off line, Error, Ready to print, Door open,
etc.
When operator intervention is required (for instance when an error has
occurred) a blinking icon will be displayed to visually attract the operator’s
attention.
Media window
For each media source (roll or cassette tray) the following
information is displayed:
■
Media feed type roll or cassette tray
■
Media feed number
■
Media size
■
Media type
■
Media sort: special or normal
■
Media orientation (cassette tray type only)
■
Media feed empty
■
Media feed available
■
Media weight
Note:
If the Media type is polyester, the thickness is expressed in mil (0.001"),
otherwise the weight is expressed in g/m2 or in pounds.
When a roll or tray is disabled, the roll or tray icon is dimmed and the media
information is replaced by the text “-disabled-” (see ‘Icons’ on page 110).
Note:
Special media are excluded from the automatic behavior of the Océ
9600.
Note:
You can hide the media by de-selecting it in the View menu option.
Scanner status window
The scanner status window is used to display the
scanner status, such as: Power off, Error, Ready to scan, etc.
When operator intervention is required (for instance when an error has
occurred) a blinking icon is displayed, until the source of the alert has been
removed.
Note:
You can hide the scanner status window by de-selecting it in the View
menu option.
Set memory status
The System Control Panel will display the percentage of
memory in use.