Oce 9600 - Page 152

152 Océ 9600 Copier/Printer User Manual
Manual feed
Description
Use ‘Manual feed’, to allow manual feed only upon request
by the printer. Only portrait orientation is allowed.
Min/max values
N/A
Menu path
Jobs - Copy & File - Defaults - Copy - Sheet - Manual feed
- <value> - Apply
Cut length method
Description
The Océ 9600 determines the length and width of each digi-
tal image. Use ‘Print cut method’, to select one of the follow-
ing default cut methods:
Standard: The print length corresponds to a standard format,
depending on the media width.
Synchro: The print length is related to the length of the im-
age. This is the default value. The minimum print length is
279 mm or 11 inches.
Custom: The print length is defined by the user. The mini-
mum length is 279 mm or 11 inches. The default value is
specified with the Cut length option.
Min/max values
N/A
Menu path
Jobs - Copy & File - Defaults - Copy - Sheet - Cut length
method - <value> - Apply
Custom cut length
Description
You can define a specific cut length.
The specified cut length is used when the Custom cut meth-
od is selected. If custom cut is enabled, the copy media
length will only depend on this setting, any other influence
is excluded.
Min/max values
11 – 590.55 inches
Menu path
Jobs - Copy & File - Defaults - Copy - Sheet - Custom cut
length - <value> - Apply