Key operator settings 153
Add leading / trailing strip
Description
Use the add leading / trailing strip settings to add, by default,
a blank strip at the top or bottom of the image. The print
length will increase accordingly.
‘Add leading strip’ will add a blank strip at the top of the im-
age.
‘Add trailing strip’ will add a blank strip at the bottom of the
image.
By default, no leading or trailing strip is defined.
Note: Adding a trailing strip will only work if the cut meth-
od is set to synchro cut.
Min/max values
0 - 16 inches
Menu path
Jobs - Copy & File - Defaults - Copy - Sheet - Strips - Add
leading / trailing strip - <value> - Apply
To Next Page
Loading...
