Oce 9600 - Page 162

162 Océ 9600 Copier/Printer User Manual
Default paper source
Description
The ‘Default paper source’ option allows you to define the
default paper source. Whether a roll or a cassette tray is se-
lected as default media source, is determined by the specified
feed preference.
Available default paper sources:
- Roll
- Cassette tray
- Manual feed
- Auto
Min/max values
N/A
Menu path
Jobs - Print - Defaults - Sheet - Default paper source - <val-
ue> - Apply
Default paper source number
Description
Use ‘Default paper source number’, to define the default pa-
per source.
Min/max values
1 - 2
Menu path
Jobs - Print - Defaults - Sheet - Default paper source number
- <value> - Apply
Print cut method
Description
The Océ 9600 determines the length and width of each digi-
tal image. The ‘Print cut method’ option allows you to select
one of the following default cut methods:
Standard:
The print length corresponds to a standard for-
mat, depending on the media width.
Synchro:
The print length is related to the length of the im-
age. This is the factory default value. The minimum print
length is 279 mm.
Custom:
The print length is defined by the user. The mini-
mum length is 279 mm. The default value is specified with
the ‘Cut length’ option.
Min/max values
N/A
Menu path
Jobs - Print - Defaults - Sheet - Print cut method - <value> -
Apply