Problem solving 265
Note:
If the protection sheet is not on the reinforcement strip (see situation
A in figure 163), there is no mechanical error and you should insert a new
tape roll as described in ‘A new tape roll’ on page 232. If this error
frequently occurs, you should call the Océ service organization (see ‘Other
problems’ on page 266).
5
Remove all tape between the rollers and knives (see figure 164).
[164] Removing the tape
6
Lead a new trailing edge of tape between the rollers and knives. For more
information, see ‘A new tape roll’ on page 232.
To Next Page
Loading...
