132
Maintenance
15
REMOVE GRAY SHEET
Remove the gray sheet (cap cleaning sheet)
and press the OK button.
16
CLOSE COVERS
Close the capping unit cover and the front
cover.
CARRIAGE IS MOVING
PLEASE WAIT
Carriage stops moving.
The carriage moves to the home position.
START CLEANING
BOTTLE IS EMPTY?
Press the OK button.
Check visually that the waste ink bottle is not full.
PH RECOVERING XXXXXXX
REQUIRED TIME XX:XX
(The cleaning starts.)
>PH MAINTENANCE
2
SHEET MOUNT CLNG
Sheet mount cleaning is complete.
Note
If the current procedure is interrupted by an error before you remove the pink sheet and the gray sheet, follow the
procedure below to remove the sheets.
1. Move the carriage to the maintenance area. (See Head guard cleaning on
page 133.)
2. Open the front cover, and then the capping unit cover.
3. Remove the pink sheet and the gray sheet that remained on the caps.
4. Close the capping unit cover, and then the front cover.
5. Move the carriage to the home position.
6. Perform a strong cleaning. (See Strong cleaning on page 247.)
To Next Page
Loading...
