Oki IP-6620 - Page 266

266
Menu tree
A´ B´
C D
>INFORMATION
2
PRINTER CONFIG
>>PRINTER CONFIG
2
INK SYSTEM :XXX
XXX: Printer ink system
>INFORMATION
2
VERSION INFO
>>VERSION INFO
2
BOOT X.XX
Displays boot version.
>>VERSION INFO
2
FIRMWARE X.XX_YY
Displays firmware version.
>>VERSION INFO
2
IPB :XXX
Displays version and revision of IPB board.
>>VERSION INFO
2
ACT :XXX
Displays version of ACT board.
>>VERSION INFO
2
HCB :XXX
Displays version of HCB board.
>>VERSION INFO
2
BTC :XXX
Displays version of BTC (FPGA) board.
>INFORMATION
2
USB INFO
>>USB INFO
2
ADDRESS :XXX
Displays USB address.
* 000 means not connected.
>>USB INFO
2
SPEED:XX
Displays USB connection speed.
(LCIS only)
MENU
2
INK AMOUNT EXTENSION
>INK AMOUNT EXTENSION
2
AVAILABLE INK
>>AVAILABLE INK
XX.XL
XX.XL: Amount of ink that can be used
>INK AMOUNT EXTENSION
2
READ EXT. CHIP
>INK AMOUNT EXTENSION
2
CHECK CHIP DATA
MENU
2
CHANGE PRESET
>CHANGE PRESET
2
XX
g
YY:NNNNNN
XX: Current media preset number
YY: Selected preset number
NNNNNN: Media name
MENU
2
EDIT MEDIA PRESETS
>EDIT MEDIA PRESETS
2
SELECT PRESET NO.
>>SELECT PRESET NO.
2
XX
g
ZYY:NNNNNN
XX: Current media preset number
Z: Registration mark (A registration mark * is displayed if the media preset is registered)
YY: Selected preset number
NNNNNN: Media name
>EDIT MEDIA PRESETS
2
EDIT PRESET NAME
>>EDIT PRESET NAME
2
ZXX:NNNNNN
Z: Registration mark (A registration mark * is displayed if the media preset is registered)
XX: Preset number
NNNNNN: Media name