Omron XTRADRIVE - Safety Precautions

XtraDrive User Manual Table of Contents/Preface
xiv
Safety Precautions
The following precautions are for checking products upon delivery, installation,
wiring, operation, maintenance and inspections.
 Checking Products upon Delivery
CAUTION
• Always use the servomotor and servo amplifier in one of the specified combinations.
Not doing so may cause fire or malfunction.
 Installation
CAUTION
• Never use the products in an environment subject to water, corrosive gases, inflammable
gases, or combustibles.
Doing so may result in electric shock or fire.
 Wiring
WARNING
• Connect the ground terminal to a class 3 ground (100. or less).
Improper grounding may result in electric shock or fire.
CAUTION
• Do not connect a three-phase power supply to the U, V, or W output terminals.
Doing so may result in injury or fire.
• Securely fasten the power supply terminal screws and motor output terminal screws.
Not doing so may result in fire.
 Operation
CAUTION
• Never touch any rotating motor parts while the motor is running.
Doing so may result in injury.