– Hardware Components of Exalogic: Added generic link that points to data
sheets.
– Environmental Requirements: Added generic link that points to data sheets.
– What Next?: Added note with a link to MOS document for changing
passwords.
– Cabling Diagrams : Removed sections about multirack cabling and added a
reference to the Exalogic Elastic Cloud Multirack Cabling Guide.
• E18478-16: December 2013
– Hardware Components of Exalogic: Added generic link that points to X4-2
data sheet.
– Hardware Components of Exalogic: Added precabling information for X4-2.
– Environmental Requirements: Added generic link that points to X4-2 data
sheet.
– Cabling Tables: Added precabling information for X4-2.
– Rebranded the document to cater to X4-2 in addition to X3-2 and X2-2.
• E18478-15: September 2013
– Added Guidelines for Managing pkey Allocation in a Hybrid Rack.
• E18478-14: August 2013
– Default Port Assignments: Added default ports assignments of the Exalogic
rack.
– Initial Configuration: Updated note about the initial configuration of the
storage appliance.
– Set Up Ethernet Over InfiniBand on Oracle Solaris 11.1: Added Oracle Solaris
11.1 procedure for setting up Ethernet over InfiniBand.
– Oracle Solaris: Creating VNICs and Associating Them with VLANs: Added
Oracle Solaris 11.1 procedure for creating VLAN-tagged VNICs.
– Activate the Storage Appliance: Updated the procedure and screenshot in this
section.
– Manage Solaris Zones on Exalogic: Created appendix describing the use of
Solaris zones on Exalogic.
– Customize Linux on the Compute Nodes: Created appendix describing how
to install, upgrade, and remove RPMs on Linux compute nodes.
• E18478-13: March 2013
– Hardware Components of Exalogic: Added direct links to the data sheets for
X2-2 and X3-2.
– Hardware Components of Exalogic: Added information about the spares kit
for Exalogic.
xviii
To Next Page
Loading...
Need help?
General
