Panasonic FP7

15.3 Error Code Table
15-11
Error
code
Error name Description Object Recovered Countermeasures
4044H Speed factor error
The setting of the speed factor
is out of the range.
Each
axis
Yes
Check the set value.
If an error occurs repeatedly
with the correct set values,
consult your Panasonic
representative.
4050H Startup speed error
The startup speed is out of the
range.
Each
axis
Yes
4080H
JOG positioning
acceleration/deceler
ation type error
The acceleration/deceleration
method of the JOG positioning
is out of the range.
Each
axis
Yes
4081H
JOG positioning
deceleration time
error
The deeleration time of the JOG
positioning is out of the range.
Each
axis
Yes
4082H
JOG positioning
acceleration time
error
The acceleration time of the
JOG positioning is out of the
range.
Each
axis
Yes
4083H
JOG positioning
target speed error
The target speed of the JOG
positioning is out of the range.
Each
axis
Yes
4102H
Home return target
speed error
The target speed of the home
return is out of the range.
Each
axis
Yes
4105H
Home return
acceleration time
error
The acceleration time of the
home return is out of the range.
Each
axis
Yes
4106H
Home return
deceleration time
error
The deceleration time of the
home return is out of the range.
Each
axis
Yes
4107H
Home return setting
code error
The home return setting code is
incorrect.
Each
axis
Yes
4110H
Home return creep
speed error
The creep speed of the home
return is out of the range.
Each
axis
Yes
4111H
Home return
returning direction
error
The moving direction of the
home return is incorrect
Each
axis
Yes
4112H
Home return limit
error
The limit switch is disabled.
(It occurs when the home return
method is set to the limit
method 1 or 2.)
Each
axis
Yes
4120H
Coordinate origin
error
The coordinate origin is out of
the range.
Each
axis
Yes
4201H
JOG operation
target speed error
The target speed of the JOG
operation is out of the range.
Each
axis
Yes
4203H
JOG operation
acceleration/deceler
ation type error
The acceleration/deceleration
type of the JOG operation is
incorrect.
Each
axis
Yes
4204H
JOG operation
acceleration time
error
The acceleration time of the
JOG operation is out of the
range.
Each
axis
Yes
4205H
JOG operation
deceleration time
error
The deceleration time of the
JOG operation is out of the
range.
Each
axis
Yes
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com