Polaris 2015 RZR 900 - Page 247

6
6.9
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
18.Place a spacer or support between the vehicle frame
and engine to hold the engine up in position.
19.Remove the PVT outer cover.
20.Remove the belt and driven clutch.
21.Remove the drive clutch from the vehicle using the
correct drive clutch puller (PN 2872085).
CAUTION
Use the correct puller to prevent damage to the end of
the crankshaft.
22.Remove seven bolts retaining the inner clutch cover.
23.Remove vent hose 17 from transmission.
24.Remove the gear position switch connector
18
, speed
sensor connector
19
, crankshaft position sensor
connector
20
, shift bracket bolts and shift bracket
21
,
shift cable clevis pin and washer
22
from the
transmission.
25.Remove the wire ties retaining harness to
transmission and mounts.
26.Remove the six engine-to-transmission mounting
bolts.
TRANSMISSION