8
8.33
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
36.Place shock shaft in clamp blocks (803-00-892).
37.Apply heat with a propane torch to the bottom of
shock eyelet.
38.Remove eyelet using an adjustable wrench or Body
Cap socket (398-00-626).
CAUTION
Eyelet will be Hot.
39.Clean Loctite® residue out from threads of the eyelet.
40.Remove Loctite® residue from shock shaft.
41.Remove Jet/Check Valve with Hex T-handle wrench.
STEERING / SUSPENSION
To Next Page
Loading...
