Polaris 2015 RZR 900 Service Manual

8
8.37
9925723 R01 - 2015 RZR 900 Service Manual
© Copyright 2014 Polaris Industries Inc.
8. Install rebound knob into eyelet, holding steel ball in
place with fingers.
9. Ensure rebound knob threads into eyelet correctly,
and you can feel the detents click.
NOTE: Adjust rebound knob to allow metering
rod to obtain maximum travel in eyelet.
10.Install new O-ring on needle and apply thin layer of
Slick Honey.
11. Place shock shaft in clamp blocks and insert needle
into shock shaft.
12.Thread in the damping jet and torque to specification.
13.Reverse shock shaft in clamp blocks and apply a thin
layer of Slick Honey to metering rod.
14.Apply specified Loctite® two threads down and two
threads wide 360° around shock shaft threads.
STEERING / SUSPENSION

Polaris 2015 RZR 900 Specifications

General

Brand	Polaris
Model	2015 RZR 900
Category	Utility Vehicle
Language	English