Monitors and Cameras
Polycom, Inc. 3–33
Adjusting the Room View
1 Do one of the following:
— From the local interface, go to System > Admin Settings > Cameras >
Adjust Room View.
— From the web interface, go to Admin Settings > Cameras and select
Adjust Room View.
2 Use the arrow buttons and zoom controls on the remote control or web
interface to show the room view you want far site participants to see.
3 Press or click Back to save the settings and return to the Camera Settings
screen.
Starting and Stopping Camera Tracking with EagleEye Director
If you enable the Voice tracking mode, EagleEye Director camera tracking can
be started and stopped by using the local interface, remote control, or Polycom
Touch Control.
To start camera tracking:
>> Do one of the following:
— From the Home screen, select Cameras > Start Camera Tracking.
— Press the Option button on the remote control and select Start Camera
Tracking.
— If the HDX system is paired with a Polycom Touch Control, follow
these steps:
1 Touch Cameras on the Home screen or the Call screen.
2 If the EagleEye Director is not currently selected, select it:
a Touch Select Cameras and select the EagleEye Director.
b Touch Control Camera.
3 Select Start Camera Tracking.
To stop camera tracking:
>> Do one of the following:
— From the Home screen, select Cameras > Stop Camera Tracking.
If you disable tracking in the local interface, the Mute/Unmute functions
on the microphone and remote no longer affect tracking. The
Mute/Unmute functions resume when you enable tracking again.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
