Polycom HDX 7000 Series User Manual

Polycom, Inc. 7–1
7
System Location, Appearance, and
Tones
Configuring Regional Settings
You can configure regional settings for the Polycom HDX Systems and for
Polycom Touch Control Devices. Refer to the following sections, Configuring
Polycom HDX Regional Settings, and Configuring Polycom Touch Control
Regional Settings on page 7-2.
Configuring Polycom HDX Regional Settings
To configure the Polycom HDX regional settings:
1 To set the regional settings, do one of the following:
— In the local interface, go to System > Admin Settings > General
Settings > Location (select if necessary).
— In the web interface, go to Admin Settings > General Settings > Date
and Time.
In order to place ISDN and Analog Phone calls appropriately, leave Always Dial
Area Code disabled if the country you call does not have area codes. Keep Always
Dial Area Code enabled if you want to do 10 digit dialing.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Polycom HDX 7000 Series Specifications

General

Content Sharing	H.239, People+Content
Microphone	Polycom HDX Microphone Array
Network Protocols	H.323, SIP
Data Standards	H.239
Video Outputs	2 x DVI-I
Operating Temperature	0°C to 40°C (32°F to 104°F)
Video Standards	H.264, H.263, H.261
Video Resolution	Up to 1920 x 1080
Audio Standards	G.711, G.722.1, G.729A
Camera	Polycom EagleEye Camera
Connectivity	Ethernet, ISDN
Video Inputs	DVI-I
Audio Inputs	RCA
Audio Outputs	RCA
Network Interfaces	10/100/1000 Ethernet
Power Supply	100-240V AC, 50/60Hz