Polycom HDX 7000 Series User Manual

Administrator’s Guide for Polycom HDX Systems
8–8 Polycom, Inc.
Local Access
To configure local access to the system:
1 Do one of the following:
— In the local interface, go to Admin Settings > General Settings >
Security > Security Settings (select if necessary).
— In the web interface, go to Admin Settings > General Settings >
Security > Security Settings.
2 Configure the following settings. The order in which the settings are
displayed differs between the interfaces.
Setting Description
Use Room Password for
Remote Access
Specifies whether the room password used for local
login is also used for the remote login. When this
setting is disabled, the remote access password
settings are displayed.
Admin ID Specifies the ID for the administrator account. The
default Admin ID is
admin .
Admin IDs are not case sensitive.
Admin Room Password Specifies the password for the local administrator
account used when logging in to the system locally.
When this password is set, you must enter it to
configure the system Admin Settings using the remote
control. The password cannot contain spaces or be
more than 40 characters. Passwords are case
sensitive.
The default Admin Room Password is the 14-digit
system serial number from the System Information
screen or the back of the system.
Admin Remote Access
Password
Specifies the password for the local administrator
account used when logging in to the system remotely
using the web interface or a telnet session.
When this password is set, you must enter it to update
the software or manage the system from a computer.
The password cannot contain spaces or more than 40
characters.
Require Login for
System Access
Specifies whether the system automatically prompts
users to log in when the system comes out of sleep
mode or completes the startup process. Enabling this
setting requires a login to use the local interface.
You can enable this setting at any time.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Polycom HDX 7000 Series Specifications

General

Content Sharing	H.239, People+Content
Microphone	Polycom HDX Microphone Array
Network Protocols	H.323, SIP
Data Standards	H.239
Video Outputs	2 x DVI-I
Operating Temperature	0°C to 40°C (32°F to 104°F)
Video Standards	H.264, H.263, H.261
Video Resolution	Up to 1920 x 1080
Audio Standards	G.711, G.722.1, G.729A
Camera	Polycom EagleEye Camera
Connectivity	Ethernet, ISDN
Video Inputs	DVI-I
Audio Inputs	RCA
Audio Outputs	RCA
Network Interfaces	10/100/1000 Ethernet
Power Supply	100-240V AC, 50/60Hz