Polycom HDX 7000 Series User Manual

Administrator’s Guide for Polycom HDX Systems
1–10 Polycom, Inc.
Polycom HDX 9000 Series Indicator Light
The following figure shows the location of the power switch and indicator
light.
The indicator light on the front of the Polycom HDX 9000 series system
provides this information:
Powering On the Polycom HDX 8000 Series, Polycom HDX 7000 Series, or
Polycom HDX 6000 Series Systems
To power on the Polycom HDX 8000 series, Polycom HDX 7000 series, or
Polycom HDX 6000 series system, do one of the following:
• Press the power button on the remote control.
• Press the power switch on the front of the system.
The Polycom splash screen is displayed within about 10 seconds.
Indicator Light System Status
Off System is powered off.
Steady green light System is initializing.
System is awake.
Blinking green light System received an IR (infrared) signal.
Steady amber light System is asleep.
Alternating green and amber lights System is in software update mode.
System is in factory restore mode.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Polycom HDX 7000 Series Specifications

General

Content Sharing	H.239, People+Content
Microphone	Polycom HDX Microphone Array
Network Protocols	H.323, SIP
Data Standards	H.239
Video Outputs	2 x DVI-I
Operating Temperature	0°C to 40°C (32°F to 104°F)
Video Standards	H.264, H.263, H.261
Video Resolution	Up to 1920 x 1080
Audio Standards	G.711, G.722.1, G.729A
Camera	Polycom EagleEye Camera
Connectivity	Ethernet, ISDN
Video Inputs	DVI-I
Audio Inputs	RCA
Audio Outputs	RCA
Network Interfaces	10/100/1000 Ethernet
Power Supply	100-240V AC, 50/60Hz