Polycom HDX 7000 Series User Manual

Administrator’s Guide for Polycom HDX Systems
1–14 Polycom, Inc.
Polycom HDX 4500 System Indicator Lights
The following figure shows the location of the power switch and indicator
lights.
The Polycom HDX 4500 system does not have a separate light for the system.
The light on the right side of the monitor indicates power for the monitor and
the system.
This indicator light provides the following information:
Privacy Shutter
Camera
Power
Indicator Light (System) Status
Off System is without power.
Steady blue light System is initializing.
System is awake.
Blinking blue light System is receiving an IR signal.
Steady amber light System is asleep.
Alternating blue and amber lights System is in software update mode.
System is in factory restore mode.
Rapidly blinking amber light System is shutting down.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Polycom HDX 7000 Series Specifications

General

Content Sharing	H.239, People+Content
Microphone	Polycom HDX Microphone Array
Network Protocols	H.323, SIP
Data Standards	H.239
Video Outputs	2 x DVI-I
Operating Temperature	0°C to 40°C (32°F to 104°F)
Video Standards	H.264, H.263, H.261
Video Resolution	Up to 1920 x 1080
Audio Standards	G.711, G.722.1, G.729A
Camera	Polycom EagleEye Camera
Connectivity	Ethernet, ISDN
Video Inputs	DVI-I
Audio Inputs	RCA
Audio Outputs	RCA
Network Interfaces	10/100/1000 Ethernet
Power Supply	100-240V AC, 50/60Hz