Polycom HDX 7000 Series User Manual

Statistics and Diagnostics
Polycom, Inc. 11–15
Downloading EagleEye Director Logs
The Polycom EagleEye Director logs contain important status and debug
information that is not included in the logs available for the HDX system.
Follow these steps to download the log information to a USB device:
1 Attach a USB storage device formatted in FAT32 to the back panel of the
EagleEye Director.
2 Restart the EagleEye Director by following these steps:
a Unplug the 12v adaptor attached to the side of the EagleEye Director.
b Wait a 5 seconds.
c Plug the 12v adaptor into the side of the EagleEye Director.
It could take up to two minutes for the EagleEye Director to restart.
3 Remove the USB storage device.
A log file using the name format of
rabbiteye_info_XXXXX.tar.gz is
generated on the USB storage device.
Remote Log Server Specifies the domain name or IP address of the syslog
server. The server must support the standard syslog
protocol (RFC 3164).
Enable ISDN Trace Logs additional ISDN connectivity information.
Enable H.323 Trace Logs additional H.323 connectivity information.
Enable SIP Trace Logs additional SIP connectivity information.
Setting Description
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Polycom HDX 7000 Series Specifications

General

Content Sharing	H.239, People+Content
Microphone	Polycom HDX Microphone Array
Network Protocols	H.323, SIP
Data Standards	H.239
Video Outputs	2 x DVI-I
Operating Temperature	0°C to 40°C (32°F to 104°F)
Video Standards	H.264, H.263, H.261
Video Resolution	Up to 1920 x 1080
Audio Standards	G.711, G.722.1, G.729A
Camera	Polycom EagleEye Camera
Connectivity	Ethernet, ISDN
Video Inputs	DVI-I
Audio Inputs	RCA
Audio Outputs	RCA
Network Interfaces	10/100/1000 Ethernet
Power Supply	100-240V AC, 50/60Hz