Security Profile Tables
E–17 Polycom, Inc.
Using the Minimum Security Profile
The following table shows the default values for specific Admin settings when you use the Minimum security profile. With the
Minimum security profile, Security Mode is enabled but can be disabled. Bold text indicates a difference in a setting between
operating with Security Mode enabled or disabled.
General Settings>Pairing
Allow Polycom Touch Control to Pair with This System Checkbox Enabled Yes Checkbox Enabled Yes
SmartPairing Mode Disabled
Automatic
Disabled Yes Disabled
Automatic
Disabled Yes
Global Services>Directory Servers
XMPP
Note: Controlled only through CMA or RealPresence
Resource Manager system provisioning.
Checkbox Disabled Yes Checkbox Disabled Yes
LDAP Checkbox Disabled Yes Checkbox Disabled Yes
Global Services>Calendaring Service
Enable Calendaring Service Checkbox Disabled Yes Checkbox Disabled Yes
Admin Settings Area/Setting
Low
(Security Mode Enabled)
Low
(Security Mode Disabled)
Range
Default
Value Configurable? Range
Default
Value Configurable?
Admin Settings Area/Setting
Minimum
(Security Mode Enabled)
Minimum
(Security Mode Disabled)
Range
Default
Value
Configurable? Range
Default
Value
Configurable?
General Settings>System Settings
Call Settings
Auto Answer Point to Point Video Checkbox Disabled Yes Checkbox Disabled Yes
Auto Answer Multipoint Video Checkbox Disabled Yes Checkbox Disabled Yes
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
