Managing the System Remotely
Polycom, Inc. 9–7
• A user requests help
• A telephone or video call connects or disconnects
Polycom HDX systems are compatible with SNMP versions 1 and 2c.
Downloading MIBs
In order to allow your SNMP management console application to resolve
SNMP traps and display human readable text descriptions for those traps, you
need to install Polycom MIBs (Management Information Base) on the
computer you intend to use as your network management station. The MIBs
are available for download from the Polycom HDX web interface.
To download the Polycom MIBs using the Polycom HDX web interface:
1 In your web browser address line, enter the HDX system’s IP address.
2 Go to Admin Settings > Global Services > SNMP.
3 Click Download MIB and follow the onscreen instructions.
Configuring for SNMP Management
To configure the Polycom HDX system for SNMP Management:
1 Do one of the following:
— In the local interface, go to System > Admin Settings > Global
Services > SNMP (select if necessary).
— In the web interface, go to Admin Settings > Global Services >
SNMP.
2 Configure these settings on the SNMP screen:
Setting Description
Enable SNMP Allows administrators to manage the system remotely
using SNMP.
Trap Version Specifies the trap protocol that the system uses.
• v2c—System uses the v2c trap.
•v1—System uses the v1 trap.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
