Polycom HDX 7000 Series User Manual

Introducing the Polycom HDX Systems
Polycom, Inc. 1–5
To position the system:
>> Position the system so that the camera does not face toward a window or
other source of bright light. Leave enough space to connect the cables
easily. Place the camera and display together so that people at your site
face the camera when they are looking at the display.
If you need to position the system horizontally, remove the stand and install
the self-adhesive feet.
Positioning the Polycom HDX 4000 Series Systems
The Polycom HDX 4000 series systems are personal video conferencing
systems for the desktop.
The Polycom HDX 4500 system is an all-in-one device with the monitor and
system combined. Position the system so that the camera does not face toward
a window or other source of bright light.
To position the Polycom HDX 4000 or HDX 4000 HD system:
1 Place the monitor on the desktop, leaving enough space to connect the
cables easily. Position the system so that the camera does not face toward
a window or other source of bright light.
Caution. Risk of Electric Shock. To reduce the risk of personal injury or damage to
the equipment, do not use screws longer than those supplied (M4x16, 8.00 mm
maximum head diameter) to reconnect the stand to the system.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Polycom HDX 7000 Series Specifications

General

Content Sharing	H.239, People+Content
Microphone	Polycom HDX Microphone Array
Network Protocols	H.323, SIP
Data Standards	H.239
Video Outputs	2 x DVI-I
Operating Temperature	0°C to 40°C (32°F to 104°F)
Video Standards	H.264, H.263, H.261
Video Resolution	Up to 1920 x 1080
Audio Standards	G.711, G.722.1, G.729A
Camera	Polycom EagleEye Camera
Connectivity	Ethernet, ISDN
Video Inputs	DVI-I
Audio Inputs	RCA
Audio Outputs	RCA
Network Interfaces	10/100/1000 Ethernet
Power Supply	100-240V AC, 50/60Hz