Administrator’s Guide for Polycom HDX Systems
3–38 Polycom, Inc.
2 If you are in a call, touch Near or Far to select either near-site or far-site
control.
3 Touch View Presets.
4 Touch a number to go to a saved preset.
To view your near-site presets:
1 From the Home screen or Call screen, touch Cameras.
2 If you are in a call, touch Near or Far to select either near-site or far-site
control.
3 Touch View Presets.
Icons for presets 0-9 are shown on the screen. Solid preset icons indicate
stored camera positions. Transparent icons indicate unassigned presets.
To store a preset:
1 From the Home screen or Call screen, touch Cameras.
2 If you are in a call, touch Near or Far to choose a near-end or far-end
camera.
3 Touch Select Camera to choose a camera or other video source.
4 Touch Control Camera to move the camera to the desired position.
5 Touch View Presets, then touch and hold a number for 5 seconds to store
the preset position. Any existing preset stored at the number you select is
replaced.
Experiencing High-Definition Video Conferencing
Polycom HDX 9002, Polycom HDX 9004, Polycom HDX 9006, Polycom
HDX8000 series, Polycom HDX7000HD, Polycom HDX6000HD, Polycom
HDX 4000 HD, and Polycom HDX 4500 systems offer the following
high-definition (HD) capabilities:
• Send people or content video to the far site in HD
• Receive and display video from the far site in HD
• Display near-site video in HD
A far-end camera preset can be stored only if the ability to control the far-end
camera is enabled.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
