Microphones and Speakers
Polycom, Inc. 4–15
To configure audio input/output settings:
1 Do one of the following:
— In the local interface, go to System > Admin Settings >Audio >
Inputs/Outputs (select if necessary).
— In the web interface, go to Admin Settings >Audio Settings.
Enable Polycom
Microphones
Polycom HDX 9006
Polycom HDX 9004
Polycom HDX 9002
Polycom HDX 9001
Polycom HDX 8000 HD
Polycom HDX 7000 HD
Polycom HDX 7000
Polycom HDX 6000 HD
Polycom HDX 4000 HD
Polycom HDX 4000
Specifies whether microphones attached to the system’s
microphone input are enabled.
Enable MusicMode Specifies whether the system transmits audio using a
configuration that best reproduces live music picked up
by microphones.
Note: Noise suppression, automatic gain control, and
keyboard noise reduction are disabled when this setting
is enabled.
Enable Keyboard
Noise Reduction
Specifies whether the system mutes audio from any site
when keyboard tapping sounds are detected but no one
is talking at that site.
Note: MusicMode is disabled when this setting is
enabled. Keyboard Noise Reduction is not available if an
audio mixer is used.
Enable Polycom
EagleEye View
Microphones
Specifies whether the Polycom EagleEye
TM
View built-in
microphones are enabled.
Setting Description
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com