Security Profile Tables
E–11 Polycom, Inc.
General Settings>Serial Port
RS-232 Mode Off
Control
Camera PTZ
Closed Caption
Pass Thru
Off Yes Off
Control
Camera PTZ
Closed Caption
Pass Thru
Off Yes
Network>IP Network
Enable SIP Checkbox Disabled Yes Checkbox Disabled Yes
Transport Protocol Auto
TLS
TCP
UDP
TLS Yes Auto
TLS
TCP
UDP
TLS Yes
Enable Network Intrusion Detection System (NIDS)
Note: Controlled only through the Security Mode
setting’s “Auto” option, which means this setting is
enabled when Security Mode is enabled.
Auto Auto
(Enabled)
Read Only Auto Auto
(Disabled)
Read Only
Cameras
Far Control of Near Camera Checkbox Disabled Yes Checkbox Disabled Yes
Enable People+Content™ IP
Note: Controls whether the HDX system accepts
connections from the People+Content IP client.
Checkbox
Enabled
Yes Checkbox
Enabled Yes
Enable UC Board/VisualBoard Checkbox Enabled Yes Checkbox Enabled Yes
General Settings>Pairing
Allow Polycom Touch Control to Pair with This System Checkbox Disabled Yes Checkbox Enabled Yes
SmartPairing Mode Disabled
Automatic
Disabled Yes Disabled
Automatic
Disabled Yes
Global Services>Directory Servers
XMPP
Note: Controlled only through CMA or RealPresence
Resource Manager system provisioning.
Checkbox Disabled Yes Checkbox Disabled Yes
Admin Settings Area/Setting
Medium
(Security Mode Enabled)
Medium
(Security Mode Disabled)
Range
Default
Value Configurable? Range
Default
Value Configurable?
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
