Administrator’s Guide for Polycom HDX Systems
2–40 Polycom, Inc.
Call Preference
Polycom HDX 9000 series
Polycom HDX 8000 series
Polycom HDX 7000 series
Polycom HDX 4000 series
Specifies whether the Polycom HDX system uses the
Video Dialing Order or the Phone Dialing Order first
when placing calls. This setting is available only when
both video and phone call types are available.
Video Dialing Order Specifies how the system places video calls to
directory entries that have more than one type of
number. It also specifies how the system places video
calls from the Place a Call screen when the call type
selection is either unavailable or set to Auto or Video.
If a call attempt does not connect, the system tries to
place the call using the next call type in the list.
This setting is available only when Preferred Dialing
Method is set to Auto.
For more information, refer to Configuring Dialing
Order Settings on page 2-41.
Phone Dialing Order
Polycom HDX 9000 series
Polycom HDX 8000 series
Polycom HDX 7000 series
Polycom HDX 4000 HD
Polycom HDX 4000
Specifies how the system places audio calls to
directory entries that have more than one type of
number. It also specifies how the system places audio
calls from the Place a Call screen when the call type
selection is either unavailable or set to Auto or
Phone. If a call attempt does not connect, the system
tries to place the call using the next call type in the
list.
This setting is available only when Preferred Dialing
Method is set to Auto.
For more information, refer to Configuring Dialing
Order Settings on page 2-41.
Preferred Speed for
Placing Calls
IP Calls
SIP (TIP) Calls
Determines the speeds to use for IP or SIP (TIP) calls
from this system when:
• The Call Quality selection is either unavailable or
set to Auto on the Place a Call screen
• The call is placed from the directory
If the far-site system does not support the selected
speed, the system automatically negotiates a lower
speed.
Users cannot specify a call speed when placing calls
from the Polycom Touch Control.
The SIP (TIP) Calls setting is available only when the
TIP setting is enabled.
Setting Description
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
