Polycom, Inc. 114
System Commands
This chapter describes the API commands for RealPresence Group Series systems.
For an alphabetical list of all the commands, refer to the table of contents for this document. For a list of
commands by category, refer to Categorical List of API Commands on page 426.
About the API Commands
This section provides details about the descriptions for the API commands.
Definitions
Each API command is defined on one or more reference pages. The definitions are based on terms that are
listed in the following table.
Note: While every attempt has been made to ensure that the expected results of executing the API
commands are accurate and complete, Polycom cannot be responsible for system behaviors and
control actions that are not explicitly documented in this publication.sn
Terms Description
Command Description Brief statement about the purpose of the command.
Syntax Format required to execute the command.
Parameter A list of parameters that are defined for the command.
Description (parameter) A description of each parameter that is defined for the command.