Polycom realpresence group series

System Commands
Polycom, Inc. 337
snmpsystemdescription
Gets or sets the SNMP system description.
Syntax
snmpsystemdescription get
snmpsystemdescription set ["system description"]
Feedback Examples
● snmpsystemdescription set
returns
snmpsystemdescription <empty>
● snmpsystemdescription set “videoconferencing system”
returns
snmpsystemdescription “videoconferencing system”
● snmpsystemdescription get
returns
snmpsystemdescription “videoconferencing system”
Limitations
None
Comments
After making a change, you must restart the system for the setting to take effect.
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting.
set Sets the SNMP system description when
followed by the “system description”
parameter. To erase the current setting, omit
the parameter.
“system
description”
SNMP system description.