Polycom realpresence group series - Systemsetting Bfcptransportprotocol

System Commands
Polycom, Inc. 351
systemsetting bfcptransportprotocol
Gets the current setting or indicates the Binary Floor Control Protocol (BFCP) connection and provides an
option to set the connection preference to UDP or TCP.
Syntax
systemsetting bfcptransportprotocol <Prefer_UDP|Prefer_TCP|UDP_Only|TCP_Only>
systemsetting get bfcptransportprotocol
Feedback Examples
● systemsetting get bfcptransportprotocol
returns
systemsetting bfcptransportprotocol Prefer_UDP
● systemsetting bfcptransportprotocol Prefer_TCP
returns
systemsetting bfcptransportprotocol Prefer_TCP
● systemsetting get bfcptransportprotocol
returns
systemsetting bfcptransportprotocol Prefer_TCP
● systemsetting bfcptransportprotocol UDP_Only
returns
systemsetting bfcptransportprotocol UDP_Only
Limitations
None
Comments
The BFCP Transport Protocol in which your system is operating determines which protocol is required.
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting.
Prefer_TCP Specifies TCP as the BFCP connection
preference.
Prefer_UDP Specifies UDP as the BFCP connection
preference.
UDP_Only Specifies UDP as the BFCP transport protocol.
TCP_Only Specifies TCP as the BFCP transport protocol.