Polycom realpresence group series

System Commands
Polycom, Inc. 261
lanport
Gets or sets the LAN port settings of the system.
Syntax
lanport <get|auto|10hdx|10fdx|100hdx|100fdx|1000hdx|1000fdx>
Feedback Examples
● lanport auto
returns
lanport auto
restart system for changes to take effect. restart now? <y,n>
● lanport get
returns
lanport auto
Limitations
None
Comments
After making a change, you are prompted to restart the system.
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
auto|10hdx|10fdx|
100hdx|100fdx|
1000hdx|1000fdx
Sets the LAN speed and duplex mode.
This parameter is not allowed while in a
call.
auto: Automatically negotiates the LAN
speed and duplex mode.
10hdx: 10 Mbps, half duplex
10fdx: 10 Mbps, full duplex
100hdx: 100 Mbps, half duplex
100fdx: 100 Mbps, full duplex
1000hdx: 1000 Mbps, half duplex
1000fdx: 1000 Mbps, full duplex