System Commands
Polycom, Inc. 184
defaultgateway
Gets or sets the default gateway.
Syntax
defaultgateway get
defaultgateway set “xxx.xxx.xxx.xxx”
Feedback Examples
● defaultgateway set 192.168.1.101
returns
defaultgateway 192.168.1.101
Limitations
None
Comments
You can only change the defaultgateway setting if DHCP is turned off.
Parameter Description
User
Accessible Additional Restrictions
get Returns the default gateway IP address.
set Sets the default gateway when followed by
the “xxx.xxx.xxx.xxx” parameter.
“xxx.xxx.xxx.xxx” IP address to use as the default gateway.