System Commands
Polycom, Inc. 340
speeddial
Returns speed dial (Sites) entries.
Syntax
speeddial names <all|video|phone> [<range_start>] [<range_end>]
speeddial names <all|video|phone> size
speeddial group "group_name" [<range_start>] [<range_end>]
speeddial group "group_name" size
speeddial address "sys_name" ["sys_label"]
Parameter Description
User
Accessible Additional Restrictions
names Returns a list of system names in the speed
dial (Sites) list. Also returns the system type:
video, multicodec, phone, or multisite. A
multicodec system appears as a single row.
The response is in the following format:
speeddial names {0..n}.
name:"sys_name"
sys_label:"sys_label"
type:
<video|multicodec|phone|group>
...
speeddial names <all|video|phone>
done
✓
<all|video> Specifies the type of entries to return. video
returns entries that have video addresses. all
returns entries with video numbers or phone
numbers or both.
✓
size Returns the size of the result set that will be
returned by the command. The size parameter
can be used with the names command.
The response is returned in the following
format:
speeddial names <all|video|phone>
size {0..n}
✓
range_start For the names and group commands, specifies
the beginning of the range of entries to return.
✓
To Next Page
Loading...
Need help?
General
