Polycom realpresence group series

System Commands
Polycom, Inc. 263
ldapbasedn
Gets or sets the base distinguished name (DN) of an LDAP server.
Syntax
ldapbasedn get
ldapbasedn set [“base dn”]
Feedback Examples
● ldapbasedn get
returns
ldapbasedn dc=hardware,dc=domain,dc=Polycom,dc=com
where:
dc=domain component
● ldapbasedn set dc=software,dc=domain,dc=Polycom,dc=com
returns
ldapbasedn dc=software,dc=domain,dc=Polycom,dc=com
where:
dc=domain component
Limitations
None
Comments
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting.
set Sets the base DN of an LDAP server. To erase
the current setting, omit the “base dn”
parameter.
Note: This parameter does not change the
setting on the server. Instead, this parameter
changes how the Polycom system recognizes
the server.
“base dn”
Specifies the base DN of an LDAP server.
Valid characters include:
Unicode (ISO-10646) characters, including
IA5/ASCII characters and extended characters
such as é, Ø, and å.