Polycom realpresence group series

System Commands
Polycom, Inc. 367
systemsetting lineoutmode
Gets the current setting or specifies whether the volume for a device connected to the audio line out
connectors is variable or fixed.
Syntax
systemsetting lineoutmode <fixed|variable>
systemsetting get lineoutmode
Feedback Examples
● systemsetting lineoutmode fixed
returns
systemsetting lineoutmode fixed
● systemsetting get lineoutmode
returns
systemsetting lineoutmode fixed
Limitations
The systemsetting lineoutmode command is not supported on RealPresence Group 300, 310, and
500 systems.
Comments
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
fixed Sets the volume to the audio level specified in
the system interface.
variable Allows users to set the volume with the remote
control.