System Commands
Polycom, Inc. 399
videocallorder
Gets or sets the video call order of the specified protocol to the specified slot.
Syntax
videocallorder <h323|sip|gateway> <1|2|3|4>
Feedback Examples
● videocallorder h323 1
returns
videocallorder h323 1
● videocallorder sip 2
returns
videocallorder sip 2
● videocallorder gateway 3
returns
videocallorder gateway 3
Limitations
None
Comments
None
See Also
To set the dialing order for audio-only protocols, use the volume command.
Parameter Description
User
Accessible Additional Restrictions
h323 Specifies IP protocol.
sip Specifies SIP protocol.
gateway Specifies ISDN Gateway protocol.
1|2|3|4 Sets the order in which the specified protocol is
attempted when a video call is placed.
To Next Page
Loading...
