Polycom realpresence group series

System Commands
Polycom, Inc. 354
systemsetting cameracontent2
Gets the current setting or specifies Camera 3 as a People or Content source.
Syntax
systemsetting cameracontent2 <People|Content>
systemsetting get cameracontent2
Feedback Examples
● systemsetting cameracontent2 People
returns
systemsetting cameracontent2 People
● systemsetting cameracontent2 Content
returns
systemsetting cameracontent2 Content
● systemsetting get cameracontent2
returns
systemsetting cameracontent2 Content
Limitations
Command is not supported on RealPresence Group 300, 310, and 500 systems.
Comments
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
People Specifies camera as a People source.
Content Specifies camera as a Content source.