Polycom realpresence group series

System Commands
Polycom, Inc. 302
ntpserver
Sets the NTP server to use for time settings when the time server is set to manual.
Syntax
ntpserver get
ntpserver set <“xxx.xxx.xxx.xxx”|server name”>
Feedback Examples
● ntpserver get
returns
ntpserver 192.168.1.205
● ntpserver set
returns
ntpserver <empty>
● ntpserver set 192.168.1.205
returns
ntpserver 192.168.1.205
Limitations
None
Comments
You must first set the ntpmode command to manual before using the ntpserver command.
Parameter Description
User
Accessible
Additional Restrictions
get Returns the current setting.
set Sets the IP address of the NTP server using
the specified IP address or DNS name.