System Commands
Polycom, Inc. 196
echoreply
Gets or sets the system’s ability to send an Echo Reply message in response to an Echo Request message
sent to an IPv4 multicast/anycast address.
Syntax
echoreply <get|yes|no>
Feedback Examples
● echoreply get
returns
echoreply yes
● echoreply no
returns
echoreply no
Limitations
None
Comments
The number of responses may be traffic-conditioned to limit the effect of a denial of service attack.
You must restart the system after making a change to a setting.
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting.
yes Enables the echo reply option.
no Disables the echo reply option.
To Next Page
Loading...
